TPE PRODUCTS

TPV - Sutper V

SEBS - Sutper E

SBS - Sutper R

Footwear – Sutper X

SEBS - Sutper E

Sutper E consists of thermoplastic elastomer (TPE) compounds based on SEBS (Styrene Ethylene Butylene Styrene), exhibiting rubber-like properties at ambient temperatures. These compounds can be processed using various methods, including injection, extrusion, and blow molding. Furthermore, Sutper E has been specifically developed to meet market demands and customer requirements.

SEBS - Sutper E Series:

SEBS-Sutper E1010(GENERAL PURPOSE)

SEBS -Sutper E1010&E1020(GENERAL PURPOSE)

Code Hardness Density
TDS E1010001     50A 0.97
TDS E1010002     47D 0.99
TDS E1010003     45A 0.9
TDS E1010004     35A 0.91
TDS E1020001     25A 1.1
TDS E1020002     30A 0.88
TDS E1020003     25A 1.19
TDS E1020004     80A 1.05
TDS E1020005     57D 0.97
TDS E1020006     65D 0.99
TDS E1020007     25A 0.95

SEBS -Sutper E2010(FLOOR MAT)

Code Hardness Density
TDS E2010001     82A 0.98
TDS E2010003     82A 0.98
wpDataTable with provided ID not found!

SEBS -Sutper E2010(FLOOR MAT)

Code Hardness Density
TDS E2010001     82A 0.98
TDS E2010003     82A 0.98

SEBS-Sutper E1020(SEMI FILLED)

Code Hardness Density
TDS E1020002     30A 0.88
TDS E1020003     25A 1.19
TDS E1020004     80A 1.05
TDS E1020005     57D 0.97
TDS E1020006     65D 0.99
TDS E1020007     25A 0.95

SEBS-Sutper E3010(FOAMING)

Code Hardness Density
TDS E3010001     45A 0.93

SEBS-Sutper E1020001&E4010(UNFILLED)

Code Hardness Density
TDS E1020001     25A 1.1
TDS E4010015     45A 1.1
TDS E4010016     50A 1.1
TDS E4010017     55A 1.1
TDS E4010018     60A 1.1
TDS E4010020     70A 1.1
TDS E4010002     30A 1.2
TDS E4010003     35A 1.2
TDS E4010005     45A 1.2
TDS E4010007     55A 1.2
TDS E4010010     70A 1.2

SEBS -Sutper E5010(TRANSPARENT UNFILLED)

Code Hardness Density
TDS E5010002     35A 0.88
TDS E5010003     40A 0.88
TDS E5010005     50A 0.9
TDS E5010007     60D 0.9
TDS E5010008     65A 0.9
TDS E5010009     70A 0.9
wpDataTable with provided ID not found!

SEBS-Sutper E6010(PA BONDABLE)

Code Hardness Density
TDS E6010001     70A 1.06

SEBS-Sutper E7010(PC-ABS BONDABLE)

Code Hardness Density
TDS E7010001     60A 1.12
TDS E7010002     60A 1.0

Advantages of Sutper E:

  • Service temperature -40˚C to +90˚C
  • Wide hardness range (o Sh A - 65 Sh D)
  • Resistance to weathering, ozone, UV and impact
  • Recyclable
  • Provides quite higher saving on the processing cost
  • Non hygroscopic, pre drying is not necessary 
  • Adhesion to PA, ABS, PS and PC engineering plastics
  • Abrasion resistance
  • Some special grades, resistant to bacterial attack and fungus growth
  • Antistatic compounds available
  • Many grades conforming to FDA regulations
  • Available in translucent and transparent forms
  • Density changes between 0,88 and 1,35 g/cm³
  • Comply with Rosh, EN71, REACH certification standards